Automatic bagger for premade rolls of mesh bags

The Rollstock Mesh Bagger (RSB-M) is an automatic bagging machine developed for premade rolls of mesh bags. The mesh bags are separated with a vertical heating element. Produce flows through the fixed filling hole and into the bag that is supported by a supporting belt.

The bag is transported to an industrial sewing unit, followed by a second heating element to separate the top, transport part of the mesh and close the bag.


  • Constructed according to CE specifications and comes with integrated safety switches in doors
  • Single filling hole that can be used for different diameters
  • Narrow discharge belt for small filling holes
  • Easy height adjustment for long bags


  • Frame for automatic closers and printers
  • Vertical and horizontal impulse sealers for thicker foils
  • Plate inserts for 5 to 10 pounds to adjust the size of the filling hole
  • Open/close filling hole to create a large fill opening and prevent blockages
  • Vibrating hopper to prevent blockages in the hopper
  • Tape dispenser (50 to 80mm) to allow labels to be sewn to bag
  • Net Fail Switch to detect labels that were incorrectly sewn to bag
  • Thread Breach Detection to stop machine when a thread breach occurs

  • Supply Power: 220 - 240 Volt, 3 Phases and Ground
  • Packing Range: 5 to 50 pounds
  • Capacity:
    • at 5 lbs up to 24 bpm*
    • at 10 lbs up to 22 bpm*
    • at 20 lbs up to 15 bpm*
    • at 50 lbs up to 12 bpm*
    • * Depends on product and infeed system
  • Dimensions:
  • Open One Side, PE Mesh:
  • Min. 13.8" (350mm) W x 23.6" (600mm) H | Max. 16.5" (420mm) W x 31.5" (800mm) H
  • Air Consumption (conditioned dry air): 13 cfm**
    ** Air consumption may increase based on infeed system and options chosen